- New
ZRGP Energy Storage Battery Module - 4.8KWh
ZRGP Power Base Mate HV - High Voltage Solar Energy Storage System - 4.8KWh/96V/50Ah
FEATURES
4.8KWh Battery capacity
15% Longer Battery Life
Adopt high safety, long life, excellent performance LiFePO4 prismatic cells;
Over 8000 times of cycle life;
Intelligent BMS to ensure a safe reliable operation - High BMS compatibility, perfect match of energy storage inverter
Parallel on cabinet level available - Multiple parallel support, high current charge and discharge - Max 15 stacks to achieve 614KWh usable energy
Multiple communications including RS232,RS485, CAN, WIFI;
Modular rack design for easier installation and smaller landscape.
The adoption of high-performance processors, international brand devices, better stability
Power Base Mate HV Series is a high voltage battery system acquired with flexible modular design with no extra cables, which provides optimised safety, life span and performance. They are perfect batteries for all applications.
Each set of Power Base Mate contains up to 4 battery module PBL-2.56 in series connection and achieves usable capacity between 9.6 to 19.2 kWh
The MATE series can be integrated in stand-alone grids and connected to the utility grid. They can be flexibly combined with any sort of energy generator, including photovoltaics, bio energy, wind power, and diesel generators.
Applications of LiFeP04 Battery Energy Storage System -
Residential grid-tie solar with backup power - Secure power for your home during grid outages by retrofitting your grid-tied system with backup power using proven ZRGP’s solutions
Self-consumption - Extra PV power for battery charging. When PV power is low or none, load consumption should take power from the battery first, and from the grid as little as possible.
Off-grid power supply - Cut your consumption peak and save money by reducing loads.When the grid is offline, the storage system should automatically switch to off-grid powering in less than 1s, for external emergency load powering.
Backup power - Respond to external power code control in less than 1s, which is sufficient for frequency regulation and peak shaving among areas.
Community electrification - Cut your consumption peak and save money by reducing loads.
PRODUCT SPECIFICATIONS
Battery Type - LFP(LiFeP04)
Battery Module Qty - 2
Nominal Energy - 9.6KWh
Nominal Voltage - 192V
Recommended Charging Voltage - 213V
Max. Charging Voltage - 219V
Recommended Discharge Cut-off Voltage - 175.8
Max. Charging Current - 50A
Discharging Current - 50A
Max Peak Current - 75A, 10s
Operating Voltage Range - 43.2-58.4V
Cycle Life - 8000 cycles
Communication - CAN/RS485/RS232/WIFI
Dimensions - 258X688X935mm
Net Weight - 140kgs
Protection Level - IP55
Warranty - 10 years
Safety Function: Over-charge, Over-discharge, Over-current, Low/High temperature, Low-voltage, Short-circuit Protections
Operating Temperature: -20C to +55C (Charge 0C to +55C)
Certification - CE/UKCA/IEC62619/UL19731/UL9540/UN 38.3/MSDS
Application - ON Grid (Self consumption/ON Grid+Backup/Backup) and Off Grid
You might also like