E-Able Storage Lithium Batteries

FEATURES & BENEFITS 

High cycle life - 4000 cycles @80% DoD for effectively lower total of ownership cost.

Longer service life - Low maintenance batteries with stable chemistry.

Built in circuit protection - Battery Management System (BMS) is incorporated against abuse.

Better storage - up to 6 months thanks to its extremely low self

discharge (LSD) rate and no risk of sulphation.

Quickly recharge - Save time and increase productivity with less down

time thanks to superior charge/discharge efficiency.

Extreme heat tolerance - Suitable for use in a wider range of applications where

ambient temperature is unusually high: up to +60°C.

Lightweight - Lithium batteries provide more Wh/Kg while also

being up to 1/3 the weight of its SLA equivalent.

APPLICATIONS

Lithium Iron Phosphate can be used in most applications that use

Lead Acid, GEL or AGM type batteries.

Suitable applications include:

• Solar Storage

• Switching applications and more

• Base transceiver station

• Communication equipments

• Central office

• Telecommunication systems

• Electronic cash registers

• Microprocessor based office machine

• UPS

ELECTRICAL PERFORMANCE

Nominal Voltage 48V

Nominal Capacity 100 Ah

Capacity @ 20A 300 min

Energy 5120 Wh

Communication CAN2.0/RS232/RS485

Resistance ≤45 mΩ @ 50% SOC

Efficiency ＞96%

Module Parallel Up to 16 packs

CHARGE PERFORMANCE

Recommended Charge Current 20A

Maximum Charge Current 100A

Recommended Charge Voltage 54V

BMS Charge Cut-Off Voltage <54.7 V (3.65V/Cell)

Reconnect Voltage >54 V (3.6V/Cell)

Balancing Voltage <54V (3.6V/Cell)

Maximum Batteries in Series (cells) 15(*Consult MUST)

DISCHARGE PERFORMANCE

Maximum Continuous Discharge Current 100 A

Peak Discharge Current 110 A (3s)

BMS Discharge Cut-Off Current 150 A (300ms)

Balancing open voltage 51.7V (3.45V/Cell)

Recommended Low Voltage Disconnect 41.2 V (2.75V/Cell)

BMS Discharge Cut-Off Voltage >30.0V (2s) (2.0V/Cell)

Reconnect Voltage >37.5 V (2.5V/Cell)

Short Circuit Protection 250 ~ 500 μs

MECHANICAL PERFORMANCE

Dimension (L x W x H) 484 x 410 x 178 mm

Approx. Weight 39.5kg

Terminal Type DIN POST

Terminal Torque 80 ~ 100 in-lbs (9 ~ 11 N-m)

Case Material SPPC

Enclosure Protection IP54

TEMPERATURE PERFORMANCE

Discharge Temperature -4 ~ 131 ºF (-20 ~ 55 ºC)

Charge Temperature -4 ~ 113 ºF (0 ~ 45 ºC)

Storage Temperature 23 ~ 95 ºF (-5 ~ 35 ºC)

BMS High Temperature Cut-Off 149 ºF (65 ºC)

Reconnect Temperature 131 ºF (55 ºC)

HEATING FOIL PERFORMANCE

Heating Temperature Range -4 to 41 ºF (-20 to 5 ºC)

Heating Time Approximately 1 hour @ 7.5 A

BMS Heating Foil Cut-Off 158 ºF (70 ºC)