ZRGP Rack Mount Lithium Battery

The 19-inch standard battery cabinet is suitable for areas with strict environmental protection and safety requirements, such as residences, hotels, and shopping malls. Built-in large-capacity lithium iron phosphate battery pack, charge controller, lithium battery management system, seamless switch, RS485, CAN, WIFI communication full-function module. Small size, long life, stable and reliable performance, and energy-saving and environmental protection

FEATURES

The battery management system (BMS) automatically balances the control according to the state of the single battery to ensure the consistency and safety of the battery;

The internally designed BMS can protect the battery under abnormal conditions such as temperature, current, voltage, SoC, SoH, etc.;

Vertical industrial integration ensures that the product service life can reach more than 8000 cycle times(100% of charging DOD and 60% of discharging DOD);

Modular design can customise capacity according to customer requirements;

Can be matched with global mainstream brand photovoltaic inverters, such as SMA, Studer, Victron, Goodwe, Growatt, Solis, Sofar, Sermatec, etc .;

Modular design saves installation time and cost.

Applications of LiFeP04 Battery Energy Storage System - 

Residential grid-tie solar with backup power - Secure power for your home during grid outages by retrofitting your grid-tied system with backup power using proven ZRGP’s solutions

Self-consumption - Extra PV power for battery charging. When PV power is low or none, load consumption should take power from the battery first, and from the grid as little as possible.

Off-grid power supply - Cut your consumption peak and save money by reducing loads.When the grid is offline, the storage system should automatically switch to off-grid powering in less than 1s, for external emergency load powering.

Backup power - Respond to external power code control in less than 1s, which is sufficient for frequency regulation and peak shaving among areas.

Community electrification - Cut your consumption peak and save money by reducing loads.

Performance

Cell technology - LFP(LiFeP04)

Cell Model - 100Ah/3.2V

Combination Mode - 16S1P

Rated Energy - 5.12KWh

Nominal Capacity - 100Ah

Initial Internal Resistance - <50mQ

Rated Voltage - 51.2V

Charge Cut-off Voltage - 58.4V

Discharge Cut-off Voltage - 43.2V

Standard Charge Current - 20A

Max. Charge Current - 95A

Standard Discharge Current - 50A

Max. Discharge Current - 95A

Operating Temperature - Charge 0C-+50C, Discharge: -20C-+50C

Communication - CAN / RS485 / RS232

Weight - 45kg 

Dimension (W*D*H) - 420×440×132mm

Installation - Rack / Wall / Cabinet-Mounted

Certification - CE/UKCA/IEC 62619/UN 38.3/MSDS